APC Back-UPS Pro 865 Watt / 1500 VA LCD 230V

QuickFind: 238121 Mfr part code: BR1500GI
  • For UPS advice email [email protected]
  • Power Capacity: 865 Watt / 1500 VA
  • Input Connector(s): Power IEC 320 EN 60320 C14
  • Input Voltage: AC 230 V

Product Description

APC Back-UPS Pro 865 Watt / 1500 VA LCD 230V

For the Replacement Battery please see QF 482013.

The Back-UPS Pro provides abundant battery backup power, so you can work through medium and extended length power outages. It safeguards your equipment against damaging surges and spikes that travel along utility and data lines. The Back-UPS Pro also features automatic voltage regulation (AVR), which instantly adjusts high and low voltages to safe levels, so you can work indefinitely during brownouts and overvoltages.
The Back-UPS Pro also includes unique "green" features, automatically turn off idle peripherals. A high efficiency charging system and "AVR Bypass" also reduce power consumption. With the rest of the Back-UPS Pro's standard features, this is the perfect unit to protect your productivity from the constant threat of bad power and lost data.
Key Features
  • Input Voltage - AC 230 V
  • Frequency Required - 50/60 Hz
  • Input Connector(s) - Power IEC 320 EN 60320 C14
  • Power Capacity - 865 Watt / 1500 VA
  • Remote Management Interface - RS-232, USB
Green mode 
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Battery failure notification 
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Power-saving outlets 
Automatically cuts power to idle equipment to conserve electricity.
Resettable circuit breaker 
Easy recovery from overloads; no need to replace a fuse.
Extendable Run Time 
Additional batteries can be added to provide power to the load for an extended period of time in the event of utility supply failure.
Battery-protected and surge-only outlets 
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Cold-start capable 
Provides temporary battery power when the utility power is out.
Hot-swappable batteries 
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Disconnected battery notification 
Warns when a battery is not available to provide backup power.
Dataline Surge Protection 
Provides protection of connected equipment from power surges on the data lines.
Automatic self-test 
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Adjustable voltage-transfer points 
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable voltage sensitivity 
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Audible alarms 
Provides notification of changing utility power and UPS power conditions
User-replaceable batteries 
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
USB connectivity 
Provides management of the UPS via a USB port (not available on all models).
Serial Connectivity 
Provides management of the UPS via a serial port.
Transformer-block spaced outlets 
Protect equipment with input transformer blocks without blocking access to other receptacles.
Boost and Trim Automatic Voltage Regulation (AVR) 
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Intelligent battery management 
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved 
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Building Wiring Fault Indicator 
This LED informs users of potentially dangerous wiring problems in the wall circuit.
Battery replacement without tools 
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
LCD graphics display 
Text and mimic diagrams that display modes of operation, system parameters and alarms.


Please note: networking components such as switches, routers, UPS and wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on [email protected].

Technical Specification

APC Back-UPS Pro 865 Watt / 1500 VA LCD 230V

General

Width 11.2 cm
Depth 38.1 cm
Height 30.2 cm
Weight 13.4 kg
Enclosure Colour Black
Output Connectors 10 x IEC connector
Device Type UPS - external
Colour Black

Power Device

Surge Suppression Yes
Input Connector(s) Power IEC 320 EN 60320 C14
Output Voltage AC 230 V 50/60 Hz
Input Connectors Power IEC 60320 C14
Power Output Connectors Details 5 x power IEC 60320 C13 (surge) ¦ 5 x power IEC 60320 C13 (UPS and surge)
Input Voltage AC 230 V
Frequency Provided 50/60 Hz
Frequency Required 50/60 Hz
Power Capacity 865 Watt / 1500 VA
Dataline Surge Protection Network - RJ-45 ¦ Phone line - RJ-11
Output Waveform Stepped approximation to a sinewave

Manufacturer Warranty

Service & Support Limited warranty - 2 years ¦ European Union: limited warranty - 3 years
Service & Support Details Limited warranty - 2 years
Regional Warranty Exceptions European Union - 3 years

Miscellaneous

Cables Included Power cable - external - 1.8 m
Features Audible alarm, LCD display, Automatic Voltage Regulation (AVR)
Compliant Standards GOST, GS, NEMKO, RoHS

Battery

Quantity 1
Technology Lead Acid

Networking

Remote Management Interface RS-232, USB

Expansion / Connectivity

Interfaces 1 x management (RS-232/USB)

Software / System Requirements

Software Included Drivers & Utilities, APC PowerChute Personal Edition

Environmental Parameters

Min Operating Temperature 0 °C
Max Operating Temperature 40 °C

Dimensions & Weight

Width 11.2 cm
Depth 38.1 cm
Height 30.2 cm
Weight 13.4 kg

Dimensions & Weight (Shipping)

Shipping Width 23.8 cm
Shipping Depth 48.9 cm
Shipping Height 38.2 cm
Shipping Weight 14.5 kg

Product Reviews

Product Discussion

APC Back-UPS Pro 865 Watt / 1500 VA LCD 230V

Our comments box is a great way for you to view other people's feedback about products on Ebuyer.com, and add your own.

  • This tool is open to everyone.
  • You are responsible for the contents of your comments and any consequences that may arise as a result of them.
  • Comments that contain any of the following will be deleted: terms considered explicit and inappropriate; defamatory, obscene, unlawful, harmful, or offensive.

Add-ons and Accessories

Replacement Battery # 124

APC Replacement Battery Cartridge # 124

£127.98 inc. vat
£106.65 ex. vat